P2 Indoor led display digital advertising machine for shopping center & hotel
Item | P2 Indoor Full Color LED Display |
Model Number | P2 |
Pixel Pitch | 2mm |
Pixel Density(dots/m²) | 250000 |
Pixel Configuration | 3 IN 1 |
LED Type | SMD1010 |
Module size(mm) | 256*128 |
Module Resolution(dots) | 128*64 |
Min.Viewing Distance(m) | ≥2 |
Brightness(cd/m²) | ≥1200 |
Viewing Angle(degree) | ≤140° |
Average Power Consumption(w/m²) | 500-750 |
Scan Mode | 1/24 |
Protection Level | IP21 |
Cabinet Size(mm) | 512*512 |
Color Temperature | The brightness of R.G.B.is adjustable according to software 100level; Color temperature is adjustable in terms of detailed requirements |
Input Voltage | AC220 V/50HZ or AC 110V/60HZ |
Refresh Rate | LED screen refresh frame frequency recommended is 300-600HZ(recommended) |
Color | 64g color(on the condition of 4096 gray scale) |
Horizontal/Vertical viewing angle | <140° |
Gray Scale | Recommended 14 BIT |
Effective Communication Distance(without relay) | Unshielded twisted-pair net line transmission distance is 100 meters,max transmission distance is 130 meters. |
Product Features
1) Die-casting aluminum panel, to achieve high precision process to seamless and good thermal dissipation
2) Point by point highlights, color calibration, making sure whole screen brightness and color consistency with highly reductive
3) Wide viewing angle, high contrast, high brightness (adjustable), high intensity (14bit gradation processing), high refresh, softer image, display lifelike images to meet the high-speed motion picture display
4) Low brightness with high gray scale, adjustable screen brightness and height to meet different requirements on brightness in different indoor place;
5) Perfect screen performance.
FAQ
Important Knowledge of LED Display
1. What is LED?
LED stands for Light Emitting Diode, a kind of semiconductor which is used to give and receive the electronic signal into infrared rays or light, using the characteristics of compound semiconductor. This is used for household appliances, remote controller, electric bulletin board, various kinds of automation appliances.
2. What are Pixel Pitch, Pixel Density, LED QTY and Pixel Configuration?
Pixel Pitch is the distance between neighboring pixels.
Pixel Density is the quantity of pixels per square meter.
LED QTY is the quantity of LED lamps per square.
Pixel Configuration is the description of the consistence of a pixel. For instance, we use 1 red lamp, 1 green lamp, and 1 blue lamp to compose a pixel, the pixel configuration is 1R1G1B.
3. What are LED Type, Module Size and Module Resolution?
LED Type is the description of LED lamp. For instance, the brand, the shape in physical, the size of the lamp etc.
Module Size is the measurement of a module.
Module Resolution is the number of pixels per module.
4. What is Drive Method, Driving IC and Power Supply?
Drive Method: We always use static, 1/4 scan, 1/8 scan, 1/16 scan, the latter one contributes to less brightness than the former. We always use the static outdoor, and use the different kinds of scan indoor.
Driving IC is the generic term for several kinds of IC, which are used to control the LED lamps, and as a bridge between the control system and lamps.
Power Supply: a kind of device that used as a transfer from 220V AC into 5V DC. It always seems like a box in the cabinet.
5. What is Viewing Angle?
Viewing angle is the maximum angle at which a display can be viewed with acceptable visual performance. It includes horizontal viewing angle and vertical viewing angle.
