LightS P2.976 Led Digital Billboard Advertising
Product Details
Product Parameters
Pixels pitch: | 5 mm |
Module pixels: | 64*32 |
Pixel density: | 40000 pixels/m2 |
Driving Method: | Lamp & IC driver Integrated |
Mode Scan | 1/8 Scan |
Brightness: | 4500~5200cd/m2 |
Display color: | 16.7 million |
LED configuration: | 1R1G1B 3in1 / SMD2727 |
Working Temperature: | -20℃~50℃ |
Module size: | 320mm*160mm |
Best view distance: | ≥5m |
Frame material: | Iron |
View angle: | 140°(Horizontal) / 140°(Vertical) |
Input Voltage: | AC220V/50Hz or AC110V/60Hz |
Refresh rate | 1920Hz/s |
Average Power Consumption | 450-800w/m2 |
Lifespan | 100,000Hours |
Protection Level | IP65 |
Product Advantages
1.ultra-thin: single box 5-7.5KG, 70-100mm thick;
2.ultra-high refresh rate: can ensure that high-definition cameras and cameras can capture high-definition delicate display when shooting;
3.low brightness and high gray performance: in the case of low brightness, the display gray level is uniform, the display consistency is good;
4.high contrast: mask design, black body SMD, the surface is not reflective, large viewing angle, display effect is good;
5.high uniformity of brightness and color: the same batch of light-emitting devices are selected with high quality to ensure high uniformity;
6.Adopt advanced blanking scheme: completely eliminate the phenomenon of darkness and ghosting;
7.High reliability and long life: It adopts the design of in-line adapter board to simplify the connection in the cabinet, effectively reduce the connection problem and reduce signal attenuation and interference. High-quality light-emitting devices ensure high reliability and long life;
8.seamless and fast splicing, simple maintenance and repair: the use of the lock structure makes the splicing operation simple and convenient without tools;
9.no noise: quiet design, free air conditioning, fan-free installation, eliminate noise, reduce power consumption, save energy and energy;
10.real-time error detection function: you can independently detect whether each LED is open circuit without adding additional external originals, and can eliminate the cross and other problems.
