Led Dance Floor Panels
| Pixel Pitch | 5mm |
| Pixel Density(dots/sqm) | 40000 |
| Module Size(mm) | 160mm*160mm |
| Module Resolution(dots) | 32*32 |
| LED Type | SMD2727(3in1) |
| Brightness( cd/sqm) | >4500 |
| Scan Mode | 1/8 |
| Cabinet Size(mm) | 960mm*960mm |
| Average Power Consumption(W) | 350-600 |
| Voltage | AC220v/50Hz Ac110v/60Hz |
| Protection Level | IP65 |
| Lifespan | 100000 Hours |
| Refresh Rate | LED screen refresh frame frequency recommended is no less than 1920HZ(recommended) |
| Color | 64g color( on the condition of 4096 gray scale) |
| Horizontal/Vertical View Angle(degree) | 140° |
| Color Temperature | The brightness of R.G.B.is adjustable according to software 100level; Color temperature is adjustable in terms of detailed requirements |
| Gray Scale | 14 BIT Recommended |
| Effective Communication Distance(without relay) | Unshielded twisted-pair (UTP) net line transmission distance is 100 meters, max transmission distance 130 meters |
Floor tile of the LED display screen are loaded with pressure sensor or capacitive sensors or infrared sensor devices.Such as using infrared sensor, can tracing the people, to be able to follow the activities of the human body presents the real-time picture, thus can realize such as actors and the audience, appeared at the foot of water ripple, such as the bloom effect
Interactive floor tile screen is based on LED floor tile screen, adding the induction interactive function. It's equipped with a virtual imaging technology in the application, plus a well-customized video source, which can be used for entertainment, such places like bars, dance festivals, night clubs, weddings and other public entertainment venues.
Interactive LED floor tile screen is best decision for fashion shows. It can be actively promoting a brand's products in all way. The effects of realistic three-dimensional dynamics make it easier to capture customer attention in a World of Information Overload.
1)strong carton packaging
2)flight case
3)wooden case
Ps:(according to client demand to choose packaging )
What should I do if there is signal interference on the splicing screen?
The splicing screen signal interference is mainly caused by these several reasons:
1. The space radiation interference caused by the transmission line caused by the power supply of the power supply system;
2. The fault caused by short circuit and open circuit of the core wire of the video cable and the shielded cable;
3. The quality of the video transmission line is not good, and there is a strong interference source near the system.
How to solve the problem of splicing screen signal interference?
1. If it is determined that the signal interference is caused by the power supply of the power supply system, then the entire system of the liquid crystal splicing screen can be basically solved by using the purifying power supply or the online ups power supply.
2. If it is the spatial radiation interference introduced by the transmission line, you can understand the surrounding environment first when the system is established, try to avoid or keep away from the radiation source; another method is to strengthen the front end and the center equipment when the radiation source cannot be avoided. Shield, use steel pipe for the pipeline of the transmission line and be well grounded.
3. If it is a fault caused by a short circuit or a broken circuit between the core wire of the video cable and the shielded network, as long as the connectors are carefully checked one by one, it can be solved.
If the above methods can not solve the problem, you need to contact the LCD splicing screen manufacturers to solve, the general formal manufacturers have a professional after-sales team can arrange technical staff on-site inspection and maintenance in the shortest time.
