LED, Light Emitting Diode, a solid-state semiconductor device that converts electricity directly into light. The heart of the LED is a semiconductor chip, one end of the chip attached to a bracket, one end is negative, the other end connected to the power of the positive, so that the entire chip is encapsulated by epoxy resin. Semiconductor wafers are composed of three parts, part of the P-type semiconductor, in which the hole inside the dominant position, the other end is the N-type semiconductor, where the main is the electron, the middle is usually 1 to 5 cycles of quantum wells. When the current through the wire acting on the wafer, electrons and holes will be pushed to the quantum wells, electrons in the quantum wells with holes combined, and then will be in the form of photon energy, which is the principle of LED light. And the wavelength of light is the color of light, which is determined by the material that forms the P-N junction.
Second, SMD It is the abbreviation of Surface Mounted Devices, meaning: Surface Mount Device It is SMT (Surface Mount Technology Chinese: surface adhesion technology) components of a.
"At the initial stage of the production of electronic circuit boards, the through-hole assembly is done entirely by hand, and after the first automated machines are available, they can be placed with some simple pin components, but complex components still need to be placed manually for wave soldering. Surface mount components were introduced around 20 years ago and have created a new era, from passive components to active components and integrated circuits that eventually become surface mount devices (SMDs) and can be accessed by pick-and-place equipment In a very long time people think that all the pin components can eventually be used SMD package.
Third, SMD components are chip-type transistors and integrated circuit integrated circuits include SOP, SOJ, PLCC, LCCC, QFP, BGA, CSP, FC, MCM and so on. Examples are as follows:
1, the connection (Interconnect): to provide mechanical and electrical connection / disconnected, by connecting plugs and sockets, the cable, bracket, chassis or other PCB and PCB connected; but the actual connection with the board must be through the surface mount Type contact.
2, a active electronic components (Active): in analog or digital circuits, you can control their own voltage and current to produce the role of gain or switch, that is, the response to the signal, you can change their basic characteristics.
B Passive electronic components (Inactive): when the application of electrical signals do not change their own characteristics, that is, to provide a simple, repeatable response.
3, shaped electronic components (Odd-form): its geometric shape factor is peculiar, but not necessarily unique. So must be manually mounted, its shell (compared with its basic function) shape is not standard such as: many transformers, hybrid circuit structure, fan, mechanical switch block, and so on. Various SMT components of the parameters Chip chip resistance, capacitance, etc.: Size specifications: 0201, 0402, 0603, 0805, 1206,1210, 2010, and so on. Tantalum capacitor: size specifications: TANA, TANB, TANDSOT transistor: SOT23, SOT143, SOT89 and other melf cylindrical components: diodes, resistors and other SOIC integrated circuit: Size: SOIC08, 14, 16, 18, 20, 24, 28 , 32 QFP Pinned ICs PLCC IC: PLCC20, 28, 32, 44, 52, 68, 84 BGA Ball Grid Array ICs: Array Spacing Specifications: 1.27, 1.00, 0.80 CSP Integrated Circuit: Component Edge No longer than the length of the chip inside the 1.2 times the array spacing of 0.50 microBGA nozzle spray fog of the statistical average diameter, there are many evaluation methods, usually arithmetic average diameter, geometric statistical average diameter, but the most commonly used is Sotai Seoul average, referred to as SMD.
The principle is that all fog particles are approximated by a sphere with the same surface area and volume of uniform diameter, and the diameter of the sphere is the average diameter of Sauter.
Because this statistic is a good reflection of the physical characteristics of the subject, so the most widely used in practice. SMT features high assembly density, electronic products, small size, light weight, the size and weight of the chip components only the traditional cartridge components around 1/10, the general use of SMT, the electronic product volume reduced by 40% to 60%, weight reduction 60% to 80%. High reliability, strong anti-vibration ability. Poor solder joint defect rate. High frequency characteristics. Reduced electromagnetic and RF interference. Easy to achieve automation, improve production efficiency. Reduce the cost of 30% to 50%. Saving material, energy, equipment, manpower. It can be seen that the two are not the same, but there are SMD package LED
