Excellent Led Display And Packaging Materials

Apr 13, 2018

Leave a message

The quality of led display screen lies in the use of packaging technology, and the key of packaging technology in addition to advanced and reliable technology, packaging chip materials, packaging materials and process control has a direct relationship, with the rapid development of the media industry, advertising industry, business exhibition industry, wedding industry and other industries, the quality of the display screen with the increasing requirements for led components.

 Led packaging materials used mainly include chip, solid crystal glue, bracket, packaging glue, bonding wire, etc.  The following is a brief introduction to the basic development of domestic packaging materials in Shenzhen Lights Technology Co,.Ltd.

 I chip

 As the core of led device, led chip determines the life and luminous performance of the whole led display.  As the cost of led chips is reduced, led chip size cutting is becoming smaller and smaller, which brings a series of performance problems.

 Ii. glue

 In the packaging glue mainly silicone and epoxy resin two kinds.

 ( 1 ) silicone.  The silicone phase has high cost performance, excellent insulation, dielectric property and adhesion.  Its disadvantage is easy to absorb moisture, air tightness is weak.  Rarely used in packaging applications for led devices.

 ( 2 ) epoxy resin.  Epoxy resin is easy to age, heat resistance is poor, easy to be wet, and short-wave light, easy to change color at high temperature and other properties.  Epoxy resin has certain toxicity, led thermal stress matching degree is not high, greatly affect the led performance and life.

 Iii. led bracket

 ( 1 ) the structure of the bracket to improve the design.  Plcc bracket because PPA and metal bonding is physical bonding, after the high temperature reflow furnace gap will become larger, resulting in water vapor easily into the device along the metal channel and affect the reliability.

 ( 2 ) the role of stents.  Plcc ( plastic led chip carrier ) is the carrier of SMD led devices, which plays a key role in the reliability and light output of led.

 ( 3 ) the production process of stents.  Plcc bracket production process mainly includes metal strip punching, electroplating, PPA ( poly o-phthalamide ) injection molding, bending, five-sided three-dimensional inkjet and other processes.  Among them, electroplating, metal substrates, plastic materials occupy the main cost of the stent.

 Iv. bonding wires

 Common bond wire used in led device package include gold wire, copper wire, palladium plated copper wire, and alloy wire.

 ( 1 ) palladium - plated copper wire.  Palladium - plated copper wire, also known as " palladium - plated bonding copper wire", is used to prevent copper wire oxidation. palladium - plated copper wire has the advantages of good solderability, high mechanical strength and moderate hardness, and is commonly used in high-density multi-pin integrated circuit packaging.

 ( 2 ) gold wire.  Gold wire is the most widely used, the most mature process, but expensive, led packaging costs are too high.

 ( 3 ) copper wire.  The copper wire has the advantages of low cost, good heat dissipation, slow growth of intermetallic compounds in the process of welding wires and the like.  The defects are easy oxidation, high hardness, high strain strength and the like.  Especially in the process of bonding copper ball burning, copper is easy to oxidize, and the formed oxide film reduces the bonding performance, which puts forward higher requirements for process control in the actual production process

 The better the materials used in each step of packaging, the better the quality of the display.  At the same time, China's packaging technology needs more communication and communication with the world needs further innovation, I believe that China's led industry will be better in the near future.