P1.875 Indoor Led Display Electronic Message Boards
| Pixel Pitch | 1.875 |
| Pixel Density(dots/sqm) | 284000 |
| Module Size(mm) | 200*150 |
| Module Resolution(dots) | 106*80 |
| LED Type | SMD1010 |
| Brightness( cd/sqm) | <1000 |
| Scan Mode | 1/32scan |
| Cabinet Size(mm) | 400*300 |
| Average Power Consumption(W) | 500-750w |
| Voltage | AC220v/50Hz Ac110v/60Hz |
| Protection Level | IP43 |
| Lifespan | 100000 Hours |
| Refresh Rate | 1920Hz/s |
| Horizontal/Vertical View Angle(degree) | 120° |
| Warranty | 2years |
| Certificates | CE/FCC/ROHS |
1.Reply your enquiry i 24 working hours.
2.Experienced staffs answers all you questions in professional and fluent English.
3.Special discount and protection of sales area provided to your distributor.
4.Competitive price is acceptable.
Q: What is the brightness, viewing angle and wavelength of the LED?
A: Luminous Intensity is equal to the amount of luminous flux emitted into a very small solid angle at a defined angular orientation from the light source. The measurement for luminous intensity is the candela. Symbol is Iv.
Viewing Angle is the total cone angle in degrees encompassing the central, high luminous intensity portion of the LED beam from the on-axis peak to the off-axis point where the LED intensity is 50% of the on-axis intensity. This off-axis point is known as theta one-half ( 1/2). Two times 1/2 is the LEDs' full viewing angle; however, light is visible beyond the1/2 point.
Wavelength is the distance between two points of corresponding phase and is equal to waveform velocity divided by frequency. It defines what color human eyes could recognize
Q: What is dominant wavelength? Please specify the ranges of wavelength in red, green and blue color respectively.
A: Dominant wavelength is defined as the best range of wavelength showing the most natural color recognized by human eyes. Researches indicate that fixed colors with wavelength of 620-630nm (red), 520-530nm (green) and 460-470nm (blue), in fact mixed in a particular proportion, can get the pure white. That is, in display field, people use luminous materials with above wavelength to make "compounded" white more natural.In order to get a good balance white led display, we specify the led colors with wavelength within 4nm for each color
Q: How much will the brightness of LED drop down after 10000hrs?
A: Based on the result of aging test, the brightness decay of green LED is around 5%-8%, while blue is around 10%-14% and red is around 5%-8%
