Led display installation method
Led display installation points: outdoor led display installation, indoor LED display installation.
Indoor LED display installation steps:
1. Lifting the ordinary mounting bracket
2. Inlay
Outdoor LED display installation:
Outdoor LED display area is large, the design of its steel structure to consider the basis of wind load, magnitude, waterproof, dust, ambient temperature, lightning and many other factors. Steel structure to be placed within the distribution cabinet, air conditioning, axial fan, lighting and other auxiliary equipment, but also a road, ladder and other maintenance facilities. The entire outdoor screen structure to meet the IP65 the following degree of protection.
2.1 mount
Ordinary mounting: A single-box display for the total weight of the screen body less than 50kg, which can be hung directly on the load-bearing wall without the need for maintenance space. The display box adopts the front maintenance design and the display will lift the display from the bottom Can be opened.
Rack mounted: suitable for general outdoor display, taking into account the difficulty of the display maintenance, in the screen body and the wall between the use of steel structure support, set aside 800mm of maintenance space, space equipped with road, ladder and other maintenance facilities , And install the distribution cabinet, air conditioning, axial fan, lighting and other auxiliary equipment,
2.2 column mounted
The mounting is suitable for the installation of the LED display on the ground, and the outdoor screen is mounted on the column. Columns are divided into single columns and double columns, in addition to the need to make screen steel structure, the need to produce concrete or steel column, the main consideration of the basic geological conditions.
2.3
The inlay structure is suitable for the display project which has been included in the planning and design of the building. The installation space of the display screen should be reserved in the construction of the civil project. The actual installation should only make the display steel structure. The display will be embedded in the building wall In the face, the back left enough maintenance space
2.4
The seat structure is built on the ground with a concrete structure to support the entire wall of the LED display wall, in the wall to build steel installation screen, the steel structure reserved 800mm maintenance space, place the relevant equipment and maintenance facilities
