Solid capacitors are called: solid aluminum electrolytic capacitors. It is the ordinary capacitor (ie, liquid aluminum electrolytic capacitor) is the biggest difference between the use of different dielectric materials, liquid aluminum capacitor dielectric material for the electrolyte, and solid capacitors dielectric material is conductive polymer. For those who often go to Internet cafes or a long time to use the computer friends, must have heard or heard due to the board capacitance caused by computer instability, and even the capacitor burst things! It is because one side of the board in the long-term use, overheating caused by thermal expansion of the electrolyte, resulting in the loss of capacitance even due to the boiling point caused by the expansion of the burst! On the other hand, if the board is not in the case of long-term power, the electrolyte easily reacts with the alumina, resulting in the phenomenon of explosion when starting or energizing. But if the use of solid capacitors, there is no such hidden and dangerous!
As the solid capacitors using conductive polymer products as a dielectric material, the material does not work with the role of alumina, power will not occur after the explosion phenomenon; at the same time it is solid products, naturally there is no heat due to the expansion of the burst The situation. Solid capacitors with environmental protection, low impedance, high and low temperature stability, high ripple and high reliability and other superior features, is the most high-end products in the electrolytic capacitor products. As the solid-state capacitance is much better than liquid aluminum capacitors, solid-state capacitor temperature of 260 degrees, and conductivity, frequency characteristics and life are good for low voltage, high current applications, mainly used in digital products such as thin DVD, projection Machine and industrial computer, in recent years has also been widely used computer board products.
Conclusion: In fact, the capacitance of the capacitor and the above description of the electrolytic capacitor is no difference, the difference between them only in the packaging or welding process is above, whether it is plug-in or patch-like installation process, the capacitor itself is erected PCB, the fundamental difference is the SMT chip installation process of the capacitor, a black rubber base. The benefits of SMT mainly lies in the production, its high degree of automation, high precision, in the transport is not as easy as the plug-in damage. However, SMT chip installation process, the need for wave soldering process, the capacitor after high temperature may affect the performance, especially the cathode electrolytic capacitor, after high temperature electrolyte may be dry. The cost of the plug-in process is low, so the performance of the capacitor itself can be better at the same cost. As the European and American factories, low mechanical costs and more expensive labor, so most of the tend to SMT chip manufacturing. While the domestic factory labor cheaper, so manufacturers are more willing to use plug-in installation.
