
1. UL profile
UL is the United States National Security Monitoring Laboratory (Underwriter Laboratories Inc.) in English abbreviation. It is the most authoritative, independent, nonprofit product safety testing and accreditation body in the world. It uses scientific test methods to determine the extent to which hazards such as materials, devices, products, equipment, buildings, etc. are harmful and harmful to life and property; formulate and issue appropriate standards and help reduce and prevent the generation of life and property Loss of information. UL's ultimate goal is to enable consumers to get a very safe level of goods, for personal health and property security to ensure that to contribute. In terms of product safety certification as an effective means of eliminating technical barriers to international trade, UL also plays an active role in promoting the development of international trade.
UL was founded in 1894, the initial stage mainly by the fire insurance sector to provide funds to maintain the operation, until 1916, UL was completely independent. After nearly a hundred years of development, UL has become a world-renowned certification body. Its own with a set of strict organizational management system, the standard development and product certification procedures. Responsible for the management of the councils composed of representatives of security experts, officials, consumers, education, public utilities, insurance and standards departments. The daily work is handled by the president and vice president.
2. UL product certification and testing services
(1) column name (LISTED)
In general, the column name is only applicable to the complete product and qualified personnel in the field to replace or install a variety of devices and devices, UL listed services include a variety of products include: household appliances, medical equipment, computers, commercial equipment As well as the role of various types of electrical products in the building, such as power distribution systems, fuses, wires, the beginning and other electrical components. UL listed products, usually in each product marked on the UL listed mark.
(2) recognized (recognized)
Recognized service is a UL service in a project, the identification of products only in the UL listed, grading or other recognized products as no devices, raw materials to use. The approved product is not structurally complete, or has a certain limit in its use to ensure that the intended safety performance is achieved. In most cases, the tracking service of the approved product belongs to the category R. (LZLU2), wire harness (ZPFW2), aluminum wire (DVVR2 and metal flexible tube (DXUZ2). Approved products require an approved mark.
(3) classification (Classification)
The grading service evaluates only the specific hazards of the product or evaluates the products other than the implementation of the UL standard (including internationally recognized standards such as IEC and ISO standards). In general, most graded products are not products that consumers use, but are industrial or commercially available. The grading mark in the UL mark indicates that the product has certain limits and conditions specified by UL. For example, a chemical such as a solvent for industrial use is evaluated only for the performance of a fire that may be generated when it reaches the ignition temperature. Some products have the same level of service and service, but generally only a part of the product or a number of aspects of evaluation. In the United States, medical X-ray diagnostic apparatus, although to comply with US law and the provisions of the radiation and beam accuracy, but because the UL only X-ray as a grading product, so only evaluate its mechanical properties, electrical performance and other Non-radiative performance aspects.
(4) multiple column name, multiple recognition or multiple grading services
When a UL applicant obtains the above-mentioned name recognition or classification service, its product is to be produced in the name of another company to meet the sales needs, you can apply for multiple column name, multiple recognition or multiple grading services. In this case, the manufacturer of the listed, recognized or graded manufacturer is permitted to use the name of another company in the product list, but the product must, in addition to the company code, product code, or other features that UL considers acceptable, Consistent with original name, approved or graded product.
(5) "AL" column name, recognition or classification services
If the UL applicant does not wish to use the name of the company to obtain the name, recognition or classification service, you can apply for another firm (usually a retailer or wholesaler) in the name of the application name, recognition or classification, this is called "AL "Name, approval or classification service. The difference between multiple quotations, multiple recognition or multiple grading services is that the applicant is not a celebrity.
3. UL standard
The UL standard covers almost all types of products, and it is the basis for testing the product. UL has published more than 500 standards, of which 70% by the American National Standards Institute (ANSI) adopted as the US national standard.
In general, UL standards in the structure can be divided into:
(1) the scope of the product covered by the standard;
(2) the structural requirements of the product;
(3) the raw material requirements used for the product;
(4) the requirements of the components used in the product;
(5) UL laboratory requirements and test methods for sample testing equipment;
(6) the test equipment requirements and test methods for the manufacturer's plant;
(7) product logo and specification requirements;
4. Certification application
The product application UL mark includes the following five steps:
1) Applicants submit information related to the product
(1) application
UL should be required in writing to test your company's products.
(2) Company information
Provide the name, address, contact person, postal code, telephone and fax details of the company in both Chinese and English.
A. Applicant Company: A company that presents a product inspection application and is responsible for the full cost of the service.
B. Listed companies: Companies listed in UL's various product catalogs.
C. Production plant: manufacturer and producer of the product.
(3) product information
Provided in English. First, make sure that your product is within the scope of UL inspection (consult the agency).
A. Product Name: Provide the full name of the product.
B. Product Model: Details of all the need to experiment the product model, variety or classification number.
C. intended use of the product: for example: home, office, factory, coal, ship and so on.
D. Parts table: Details of the composition of the product parts and models (classification number), rating, the name of the manufacturer.
For insulating materials, raw material names should be provided, for example: GE Polycarbonate, Lexan Type 104.
If the parts have been UL certification or recognition, should specify the specific parts of the parts and UL file number.
E. Electrical performance: For electronics, electrical products, should provide electrical schematics (circuit diagram) and electrical performance table.
F. Structure: For most products, the need to provide the product structure or ingredients table.
G. Product photos, instructions, security, etc. or installation instructions.
2). UL makes a decision based on the product information provided
When the product information is complete, UL will notify you by writing the UL standard, the test fee, the time of the test, the number of samples, etc., and send the formal application form and tracking service agreement to your company. The fee limit specified in the application form is the maximum cost that UL estimates based on the test item. Without your company's written authorization, the fee can not be exceeded.
3). Apply for company remittance, return application form and sample
The applicant signs the application form and the tracking service agreement and returns the form to UL Company. At the same time, through the bank remittance, at the post office or express mail to send samples (to sample the sample to be properly described, such as name, model, etc.), application forms and samples to be sent separately. In each application, UL will determine a unique project number (Project No.).
In the remittance, send samples and application form, should indicate the project number, apply for company name, so UL check.
4). Product testing
Upon receipt of your application form, remittance and test samples submitted by your company, UL will notify you of the completion of the pilot program. Product testing is generally carried out in the United States, but also in the UL recognized third-party laboratories. The test sample will be sent or destroyed according to your request.
If the product test results comply with UL standards, UL will be issued to the inspection report and tracking service rules (Follow Up Service
Procedure. The test report will detail the test situation, the sample to achieve the indicators, product structure and suitable for the use of the product safety signs.
In the tracking service details, the description of the product and the guidance to the UL area inspector are included. A copy of the test report is sent to the applicant company and a copy of the service details is sent to each production facility.
5). Applicants are authorized to use the UL mark
UL regional inspectors in China will contact the production plant for initial production inspection (IPI).
Inspectors will check the status of your products and their parts in the production line and warehouse warehouse to confirm that the product structure and parts are consistent with the tracking service details. If required by the rules, the regional inspectors will also conduct witness experiments. When the inspection results meet the requirements, the applicant will be authorized to use the UL mark.
Following the IPI, the inspectors will from time to time check the factory, check the product structure and witness the experiment. The frequency of inspection is determined by product type and throughput, and most types of products are inspected at least four times per year. The inspector's inspection is to ensure that the product continues to be consistent with the UL requirements. Please inform UL before you plan to change the product structure or parts. For minor changes, you do not need to repeat any experiments, and UL can quickly modify the tracking service rules so that the inspector can accept the change. When UL believes that the product changes affect its safety performance, the need to apply for the company to re-submit the sample to carry out the necessary testing.
The cost of the tracking service is not included in the test fee, and the UL will send you another invoice for the tracking service.
If the product test results do not meet the UL standard, UL will notify the applicant and explain the existence of the problem.
Applicants can re-sample the product after improving the product design. At this time, the application company should tell UL engineers, what products to improve.
5. Application Notes
* Make UL engineers understand the type, performance, use and product of the product you are testing.
This seems to be quite simple, but because of the language barrier, in the repeated translation of English or English translation will often lead to unexpected results. To give a simple example, Zhejiang has a factory to apply for "wiring harness" (with a variety of wire terminals and insert assembly) UL certification, Zhejiang habit of "wiring harness" is called "connector". If you open the Chinese-English dictionary, you will find the "connector" in English as "Connector". So this factory on the application of the "Connector" certification, spent a lot of time and effort, of course, can be imagined. Only the "terminal blocks" (including metal inserts and outside plastic parts) produced by the plant are allowed to have UL mark, not wire harness. In fact, all of the plant's "terminals" (Connector) are purchased. Therefore, when applying for certification, should ensure that the product name is correct. Unless you have 100% sure, otherwise, should consult the experts.
* The same product, if the potential use is not the same, the test method will be different.
For example, the same string of Christmas lights (Decorative Lighting Stings), for indoor and outdoor have a big difference. Such as indoor light string without rain test, and the outdoor light string is necessary. Again, if you produce a lamp holder only for 110V, you do not need to press 220V to test. This means that there is no need to expand the use of your product unless you intend to use your product for the new condition. On the contrary, can not narrow the scope of application. If you produce plastic for a 105 degree environment, in order to save money, you only apply for 90 degrees of the environment, although your product also passed the UL certification, but your customers can not use it for 105 degrees , Of course, you do not want to see. Therefore, to fully explain the use of your product range, so as not to waste your time and costs, to bring you unnecessary losses. For electrical, electronic products, the use of the main range, including voltage, current, power factor, ambient temperature. If you are not familiar with these areas of use, please consult your experts.
* Describe the difference between the different models
If you have a variety of models of similar products to apply for certification, or you have a similar product for UL certification, please explain the similarities and differences between these models, which can help UL engineers to decide to reduce those unnecessary Repeat the tests to reduce your costs and test time. For example, there are two types of relays to apply for certification, one is a set of contacts, and the other is two sets of contacts, the engineer in the testing process will only be the second type of product of another group of contacts To pay special attention, without having to repeat all the tests.
* Write a list of raw materials or parts for your product
UL mainly through the control of the product of the various raw materials or parts of the method to control the safety of the entire product quality. Therefore, it requires customers to submit the product when the description of the source of each component. Once these parts are confirmed, they can not be changed. If you want to use other alternative products from other plants. You must obtain prior approval from UL and may re-test your product. Otherwise, the UL inspector will find your trouble. In the preparation of this list. Your parts supplier, quantity, model, key indicators and certification body. If your part is UL approved the best description of the applicant's UL file number. (FILE NUMBER), which eliminates many of the tests for that part. Again, for some key components, it is best to choose several suppliers. UL will put these qualified products, are included in the tracking test rules. In this way, when you want to change a supplier, it will not be due to the provisions of the UL rules caused unnecessary trouble.
Although many people think that when the list of this list
