The tips of maintaining LED electronic display

Jul 26, 2017

Leave a message

 Outdoor LED display screen

1, to keep the outdoor LED display using the ambient humidity, do not let anything with moisture properties into your outdoor LED display. On the outdoor LED display with humidity plus power, will lead to corrosion of parts, thereby causing damage to the permanent jiu.

2, to avoid possible problems, we can choose passive protection and active protection, as far as possible to the outdoor LED display damage to the items away from the screen, and clean the screen as much as possible when gently wipe, the damage The possibility is minimized.

3, outdoor LED display and our users the most closely related to clean maintenance work is also very necessary. Exposure to the outdoor environment for a long time, the sun, dust and other easy to dirty, for some time down, the screen is certainly a dust, which requires timely cleaning to prevent dust for a long time wrapped surface effects watch.

4, requires stable power supply, and ground protection is good, in the harsh natural conditions, especially strong lightning weather do not use.

5, screen body is strictly prohibited water, iron and other easy to conductive metal objects. Outdoor LED display as far as possible placed in a low dust environment, large dust will have an impact on the display, while excessive dust will cause damage to the circuit. If water is for a variety of reasons, immediately disconnect and contact the service personnel until the display panel is dry before use.

6, outdoor LED display switch sequence:

A: first open the control computer to normal operation and then open the outdoor LED display.

B: turn off the outdoor LED display, and then turn off the computer.

7, recommended outdoor LED display daily rest time is greater than 2 hours, in the rainy season outdoor LED display a week or more used at least once. Generally open the screen at least once a month, lit for more than 2 hours.

8, outdoor LED display to be regularly checked whether the normal work, whether the line damage, if not work to be replaced in time, the line is damaged to repair or replacement.

9, do not play a long time in full white, full red, full green, full blue and other full-bright screen, so as not to cause the current is too large, the power cord fever is too large, LED lights damaged, affecting the display life. Do not disassemble, splice screen body!