
LED display installation methods are divided into indoor installation and outdoor installation. LED display installation is based on the construction site design, but generally speaking, the most commonly used are the following types of installation: hanging, rack, seat, floor support installation, column type, inlay type and roof type and so on. Outdoor installation generally to draw the construction drawings or LED display steel structure.
1. Outdoor Display installation mode
Outdoor LED display area is larger, the design of its steel structure should consider the foundation, wind load, magnitude, waterproof, dustproof, ambient temperature, lightning protection and many other factors. In the steel structure to be placed in the distribution cabinets, air-conditioning, axial fan, lighting and other ancillary equipment also have a Ma Ma, ladder and other maintenance facilities. The entire outdoor screen structure should conform to the IP65 below protection level.
2 column type
Install the outdoor screen on the platform or column. column is divided into columns and double columns, in addition to the production of screen steel, but also the need to make concrete or steel columns, the main consideration of the basic geological conditions. Post-mounted LED displays are usually used by schools, hospitals, public utility units for publicity, announcements, etc.
3 Inlay Type
Inlay-type structure is in the wall of the hole, the display set in the inside, the requirements of the size of the hole and the display outside the frame size, and do appropriate decoration, in order to facilitate the maintenance of the wall on the hole must be through, or the use of the former demolition mechanism.
