1, with the fastest speed with a fan or other tools, the water will be completely dry LED display screen.
2, will be completely dry after the screen body aging, the specific steps are as follows:
A, the brightness (all white) adjusted to 10%, power aging 8-12 hours.
B, the brightness (all white) adjusted to 30%, power aging 12 hours.
C, the brightness (all white) adjusted to 60%, power aging 12-24 hours.
D, the brightness (all white) adjusted to 80%, power aging 12-24 hours.
E, the brightness (all white) adjusted to 100%, power aging 8-12 hours.
Complete the above steps, LED display screen body will be basically back to normal; but in the process also need to pay attention to the following:
1, do not have the water into the LED display screen into the air box, so it is easy to break the LED lights.
2, in the warehouse when the water, the air box may have to water, and should be all the air box to be exposed to prevent the container after the water volatile to the LED display inside.
3, all the water LED display does not deal with the possibility of more or less affect the stability of the screen body, in the emergency process, the screen body power may occur after the phenomenon of dead lights.
4, all the water of the LED display screen body in the air box. More than 72 hours, the screen body is basically no repair value, please be careful.