OSRAM IR LED camp add new Ding, high spectral sensitivity

Jul 26, 2017

Leave a message

 led glass display.jpg

German LED chip maker OSRAM Opto Semiconductors actively crossed the infrared 

LED (IR LED), recently in the high-power infrared LED product line, the new SFH 4703AS

 infrared transmitter, emitting light wavelength of 810 nm. The new infrared LED enhanced

 image contrast, can enhance the monitoring and image sensing system performance, such 

as the application of license plate identification, regardless of day and night, the identification 

is very high. In addition, because the image sensor is more sensitive, with the wavelength of

 850 nm infrared LED camera compared to the LED lights in the lumen output unchanged, see 

a greater range.


High image contrast is good for analysis

 

A camera or camera that typically uses 850 nm and 940 nm infrared LEDs can not produce 

high contrast images when identifying certain colors. The OSRAM launched SFH 4703AS 

infrared LED to improve this shortcoming, it is particularly applicable to the need for excellent 

image comparison of the application device, such as installed in the toll station or parking lot

 entrance automatic license plate identification system. As the infrared LED to enhance the

 image contrast, so that the system in the identification of the license plate more quickly and 

accurately, to reduce the driving waiting time. In addition, this product can also be used in traffic 

monitoring systems and closed-circuit television surveillance system CCTV.

 

The same optical output is larger

 

Another advantage of the new infrared LED is the high spectral sensitivity. In the use of the same

 lumen output light source, 810 nm infrared LED range far better than the traditional 850 nm or 

940 nm sensor. If you want to maintain the distance from the same, the new infrared LED design 

can reduce the number of components. But it must be noted that the general human eye to see 

the infrared is a mild red light source, while the 810 nm infrared light than 850 nm more energy.


What is the new IR LED optical performance?

 

OSRAM has launched an 810 nm infrared LED for use with iris sensors for mobile devices. 

The launch of the SFH 4703AS utilizes nano-stack technology for efficient chips, stacked on 

Oslon lighting packaging products. At an amps current, the emitter produces a wattage of optical

 power; plus or minus 45 degrees of emission angle provides a wider range of illumination, at

 an amps current, the radiation intensity of 630 mW (mW / sr) per sphere. The product size is 

3.85 x 3.85 mm and the height of the lens is 2.29 mm.

 

Join this new product, OSRAM currently has three compatible, different wavelengths of infrared

 LED. These products can be used in a single lighting fixture, or used to change the spectral 

range of existing systems, but need not re-design specifications (pin to pin).