Led electronic display screen, like traditional electronic products, not only need to pay attention to the method in the process of use, but also need to maintain the display screen, in order to make the led electronic display screen life longer. Led full-color display screen use problems increase, on the one hand, because the major manufacturers in order to control the production cost, in the work of the product materials have been reduced, resulting in some products of a few parts aging in advance; On the other hand, due to improper use habits of the user. The latter situation is more common, the following Shenzhen led display manufacturers terence introduces the maintenance of led full color display screen under several methods.
( 1 ) full color led electronic display using the humidity of the environment, don't let anything with moisture properties into your full color led electronic display. Powering up the full-color display screen with humidity can cause corrosion of the full-color display screen components and permanent damage.
( 2 ) to avoid possible problems, we can choose passive protection and active protection, as far as possible to the full color display screen damage items away from the screen, and clean the screen also wipe gently as far as possible, to minimize the possibility of damage.
( 3 ) led full-color display screen is the most closely related to our users, do a good job of cleaning and maintenance is also very necessary. Exposed to outdoor environment for a long time wind, sun, dust and other easily dirty, for a period of time, the screen must be a piece of dust, which needs to be cleaned in time to prevent dust wrap surface affect the viewing effect for a long time.
( 4 ) power supply stability, and good grounding protection, in bad natural conditions, especially in strong lightning weather don't use.
( 5 ) screen body is strictly prohibited in water, iron powder and other easily conductive metal. The led electronic display screen is placed in a low dust environment as far as possible, large dust can affect the display effect, and too much dust can cause damage to the circuit. If water enters the screen for various reasons, please immediately power off and contact maintenance personnel until the display panel in the screen is dry before use.
( 6 ) switching sequence of the led display screen: a, starting a control computer to enable the control computer to run normally before starting the led electronic display screen; B: turn off the led display before turning off the computer.
( 7 ) don't play for a long time in all white, all red, all green, all blue and other full bright picture, so as not to cause the current is too large, the power cord fever is too large, led lamp damage, affect the display service life. Do not disassemble and splice the screen at will!
( 8 ) it is recommended that the rest time of the led electronic display screen is more than 2 hours a day, and that the large screen of the led screen be used at least once a week in rainy season. Generally open the screen at least once a month, lit more than 2 hours.
( 9 ) the led electronic display surface can be wiped with alcohol, or use brush, vacuum cleaner for dust removal, can't directly wipe with wet cloth.
( 10 ) led electronic display screen should be regularly check whether normal work, the line is damaged, if not work to replace in time, the line is damaged to repair or replace in time. Led electronic display internal circuit, non-professional people are prohibited to touch, lest get an electric shock, or cause damage to the circuit; If there is a problem, please professional maintenance.