LED package quality control

Jul 24, 2017

Leave a message

As the advent of high-brightness blue LED, so the use of phosphor and blue LED combination, you can easily get white LED. At present white LED has become a portable information products, the main backlighting light source, the future can even become a general household lighting source. In addition, in recent years there have been high power near ultraviolet LED, the same can be used to become white fluorescent LED, LED is characterized by small, low power consumption, long life, if with color design freedom, stability, easy to handle and so on Of the phosphor combination, you can become a new lighting source.


Usually LED and phosphor combination, the typical method is to set the phosphor near the LED, the main reason is that the phosphor can be expected to high efficiency of the light generated by the LED wavelength conversion, and the phosphor in the high radiation density of the region , The wavelength conversion is the easiest way. In addition, the phosphor encapsulation method determines the luminous efficiency and color tone of the white LED, and then the encapsulation technique of the LED and the phosphor will be discussed in depth according to the viewpoint of whitening.


Blue LED + YAG phosphor white photochemical package


Is now commercial white LED, specifically it is yellow can produce YAG: Ce phosphor dispersed in a transparent epoxy resin, and then set in the bowl of blue LED light generated by the excitation into White light, this way the white light emitting mechanism is the use of LED to produce blue light, in which part of the blue light will stimulate the YAG phosphor into yellow light, the remaining blue light is straight outside the blue and yellow color and then become white light, which The characteristic of the method is that the structure is simple, and only the phosphor coating project can be added in the production of the LED, so that the production cost can be greatly suppressed. In addition, the other feature is that the chromaticity adjustment is very simple.


As long as the color coordinates in the LED and YAG phosphor two-color coordinates of the formation of the linear range, you can adjust the tone, so we can see the YAG phosphor concentration is low, the blue penetration of light more, the overall will be Blue tone white; relative if the YAG phosphor concentration is high, the yellow conversion light ratio is more, the overall yellow tone white.


As described above, a part of the blue LED is used as a complementary color, and it is not necessary to apply a phosphor having a high density (as a percentage of the resin), so that the amount of the phosphor can be effectively reduced. In general, the percentage of phosphor and resin, although with the YAG phosphor conversion efficiency, and the shape of the cup and change, but 10 ~ 20wt% low ratio can get white light. In addition, due to the intensity of light emitted by the blue LED, the distribution of the central axis and the surroundings is not the same, even if the density of the YAG phosphors around the LED chip is exactly the same, it will still cause problems such as the unevenness of the light on the axis and the surroundings. Overcome one of the topics.


Lead Frame Type and Chip Type are blue LED set in the cup, and then mixed with quantitative YAG phosphor resin coating package. As the LED has a small, power, longevity and other characteristics, it has been widely used in mobile phones, PDAs and other portable information products, backlighting light source, and trail guide lights and other fields.