LED important parameters of doubt

Aug 04, 2017

Leave a message

outdoor led display high definition

 1. Positive operating current If:

It refers to the forward current value when the light emitting diode normally emits light. In actual use, IF should be selected as follows.


2. Forward operating voltage VF:

The operating voltage given in the parameter table is given at a given forward current. Generally measured at IF = 20mA. The positive operating voltage of the light emitting diode is 0.4 ~ 3V. When the outside temperature rises, VF will drop.


3.V-I Features:

The relationship between the voltage and current of the light-emitting diode is that the current is extremely small and does not emit light when the forward voltage is less than a certain value (called the threshold value). When the voltage exceeds a certain value, the forward current increases rapidly with the voltage, light.


4. Luminous intensity IV:

The luminous intensity of the light-emitting diode usually refers to the normal (in the cylindrical tube is the axis) in the direction of the luminous intensity. If the radiation intensity in this direction is (1/683) W / sr, then light 1 candela (symbol cd). As the general LED light intensity of two small, so the luminous intensity commonly used candlelight (Candela, mcd) for the unit.


5. LED light angle:

-90 ° - + 90 °


6. Spectral half-width Δλ:

It represents the spectral purity of the arc tube.


7. Half angle θ1 / 2 and viewing angle:

Θ1 / 2 means the angle at which the luminous intensity value is half the axial intensity value and the light-emitting axial direction (normal direction).


8. Full shape:

According to the LED luminous solid angle conversion angle, also known as the plane angle.


9. perspective:

Refers to the maximum angle of LED light, according to the different perspective, the application is also different, also known as light intensity angle.


10. Half shape:

Normal angle between 0 ° and maximum luminous intensity value / 2. Strictly speaking, is the maximum luminous intensity value and the maximum luminous intensity value / 2 corresponding to the angle. LED packaging technology led to the maximum luminous angle is not normal 0 ° light intensity, the introduction of the deviation angle, refers to the maximum luminous intensity of the corresponding angle and the angle between 0 °.


11. Maximum forward DC current IFm:

Allow the maximum positive DC current to be added. Exceeding this value can damage the diode.


12. Maximum reverse voltage VRm:

Allow the maximum reverse voltage to be added. Beyond this value, the light emitting diode may be damaged by breakdown.


13. working environment topm:

The ambient temperature range of the light emitting diode can work normally. Below or above this temperature range, the light emitting diode will not work properly and the efficiency will be greatly reduced.


14. Allow power consumption Pm:

Allows the maximum value of the positive DC voltage applied across the LED to the current flowing through it. Beyond this value, LED fever, damage.