LED display in China's development is very rapid. Now in some areas of the city can see the shadow of the LED display. However, if improper operation or understanding of the LED display is not deep may lead to shorten the life of LED electronic display. So what factors affect the LED electronic display life?
Affect the LED electronic display life factor First, the switch LED electronic display Note:
1 switch sequence:
Open the screen: the first boot, after the opening screen.
Off screen: the first off screen, after the shutdown
(First off the computer regardless of the display, will cause the screen body highlights, burn the lamp, the consequences serious.
2, switch screen interval time is greater than 5 minutes.
3, the computer into the engineering control software, before opening the screen power.
4, to avoid the screen in the state of full white screen, because the system at this time the maximum impact current.
5, to avoid out of control in the open screen, because the system at this time the maximum impact current.
A computer does not have access to control software and other programs;
B computer is not powered;
C control part of the power supply is not turned on.
6. Ambient temperature is too high or poor heat conditions, it should be careful not to open the screen for a long time.
7. Electronic display part of a line is very bright, it should pay attention to timely off the screen, in this state should not be a long time to open the screen.
8. Often appear on the display power switch trip, should promptly check the screen or replace the power switch.
9. Regularly check the firmness of the hook. If there is loosening, pay attention to timely adjustment, re-reinforcement or update hanging pieces.
10. According to the large screen display screen body, control part of the environmental conditions, to avoid insect bites, if necessary, should be placed anti-rat poison.
Affect the LED electronic display factors Second, the control part of the changes, changes to note
1. Computer, control part of the power cord zero, the fire can not be reversed, should be strictly according to the original location of the plug. If the peripherals, after the connection is completed, should test whether the cabinet charged.
2. Mobile computer and other control equipment, power should be checked before the first connection line, control panel with or without loose phenomenon.
3. Can not arbitrarily change the communication line, flat connection line location, length.
4. After moving, such as the discovery of short circuit, tripping, burning line, smoke and other abnormal appearance, should not be repeated power test,
Affect the LED electronic display life factor Third, the use of software operating considerations
1 software backup: WIN2003, WINXP, application, software installation program, database, etc., it is recommended to use "a key to restore" software, easy to operate.
2 master the installation method, the original data recovery, backup.
3 master the control parameter settings, basic data preset changes
4 skilled use of procedures, operation and editing.
5 regularly check the virus, remove the irrelevant data
6. For non-full-time staff, do not operate the software system.