Outdoor advertising led display on the use of relatively high environmental requirements, taking into account the outdoor LED display may be affected by low temperature, typhoon, rainstorm and thunder and weather effects and damage, so the following few suggestions:
1. High temperature outdoor LED displays are usually larger in the course of the application of large power consumption, the corresponding heat is also large, coupled with the outside temperature is high, if you can not solve the heat problem, it is likely to cause the circuit board Fever short circuit and other issues. In production, to ensure that the display circuit board in good condition, as far as possible in the shell design, select the hollow design, contribute to heat dissipation. In the installation, according to the device, insist on the display where the ventilation is good, when necessary, add to the display cooling equipment, such as the internal installation of air conditioners or fans to help the display heat.
2. Typhoon outdoor LED display installation of many types of installation is also very diverse. There are wall-mounted, inlaid, column type, hanging and so on. Well in the typhoon season. In order to make the LED display device does not fall, the load-bearing steel structure of the display screen has strict requirements. Engineering units must be strictly in accordance with the standard anti-typhoon level to design and installation, but also have a certain degree of seismic capacity to ensure that outdoor LED display will not fall and cause injury and other hazards.
3. Rain storm rain in the South, and so the LED display itself must have a high waterproof protection level will not encounter rain erosion. Outdoor use of the environment, outdoor LED display to achieve IP65 degree of protection, the module to be poured plastic package, the selection of waterproof box, waterproof rubber ring to the module and the box connected.
