
Many users in the purchase of display equipment, often very concerned about the various parameters of the device indicators, one of which is brightness. However, with regard to brightness, different devices on the market are often marked with a variety of brightness units. What do they mean? How to compare or convert? What are the reference values for display device performance? This article gives you an answer.
For display devices, brightness is a critical measure of performance. The brightness is measured in candela per square meter (cd / m2) or Nitide (nit). Just as the power of an automobile engine is expressed in terms of "horsepower", Nitt is so. The meaning of its representative is the brightness of a monitor is equivalent to the number of candles. 300 Nate desktop display light amount equivalent to 300 candles in 1 square meter of space brightness. 1500 Nate outdoor display is equivalent to 1500 candles of illumination.
In addition, Nate and ANSI lumens (general specification in front projection solutions) are not the same thing. 1 lumens represent the amount of light reflected by a candle at a constant distance per square meter of area. You can measure the reflected light with lumen, and use nits to measure the direct light. This is why the brightness of the projector is usually lumens, and the display (including the rear projection) with the reasons for the nits. In some cases, the projection installation is based on the calculation of the Ford-Lamberts (FL), which is equivalent to a lumen brightness per square meter, with the aim of making the brighter room produce a higher perceived brightness screen reflection. 1 nits equivalent to about 0.292FL.
Back to the monitor, in order to measure the brightness of the display, you need to display some screens on the screen. Normally, when the screen shows a full white screen, from the edge to the edge, from top to bottom, the brightness measurement. For a display that requires a backlight, such as a liquid crystal display, an all-white measurement can be used to know the maximum light output that the display can achieve. Although the user is unlikely to display a full white image on the screen, this value represents the highest brightness that the display can achieve.
For the self-luminous display devices (such as plasma, OLED or LED screen), the brightness calculation is more difficult. Since each pixel is addressed directly (and turned on or off according to the content pointing to the pixel), the brightness of each pixel will vary with the sharing of the power of the driving pixels among all the pixels. For example, a full white screen is displayed, and the measured brightness will be lower than the brightness of a small white box in the middle of the screen. These two cases represent the common two indicators, one is the standard brightness measurement (ie, typical), the other is the peak brightness measurement (ie, peak).
Here is clear, if someone asked "this device shows how bright the light" problem, it is difficult to directly answer him. This depends on the specific measured values, as well as the display technology used, as well as what is displayed on the screen when measuring.
