Brief Analysis of the Characteristics and Advantages of LED Wall Panel Manufacturers
High permeability design, 40% - 50% of the air permeability does not affect the ventilation and lighting of the rear of the screen, has strong wind resistance, effectively reduces wind load, further reduces the strength and weight of the basic structure of the LED display screen, and can also be installed in the glass curtain wall of the building.
The Characteristics and Advantages of LED Wall Panel
1. High permeability design, 40%-50% of the permeability does not affect the ventilation and lighting of the rear part of the screen, has strong wind resistance, effectively reduces the wind load, further reduces the strength and weight of the basic structure of the LED display screen, and can also be installed in the glass curtain wall of the building.
2. Light weight, LED strip screen is hollow-out design, compared with traditional LED display box, there is no fixed box size. Take the most popular outdoor LED strip screen in the market as an example, the weight of each square meter is only 20 kilograms, which is one fifth of the weight of traditional LED display box. It is very popular with customers.
3. Steel-free structure. The principle of assembling large screen with modules is adopted for LED lamp-bar display screen. Without any steel structure, single module can complete the disassembly and assembly of large screen. According to the customized size of customers, the fastest installation can be achieved. The most advanced U-shaped aluminium installation parts are used for LED lamp-bar display screen, which guarantees the outdoor wall to the greatest extent. The body and the LED display screen fuse each other.
4. Without air conditioning, the traditional LED display panel will not work well because of its insufficient heat dissipation. Similar problems can be avoided in the application of LED lamp bar screen because of the advantages of permeability, wind and other natural reasons can be avoided, and it can work normally in extreme cold weather such as Russia.
5. Energy-saving and environmental protection, no auxiliary heat dissipation equipment, no noise, low power consumption, each LED lamp module is made of environmentally friendly materials, permeable around, so good self-cooling can be achieved. At the same time, the power supply and control are separated from the light-emitting materials, and there is no need to build a special heat dissipation system like the traditional LED screen.
6. High level of protection: wire drawing aluminium shell, front using imported silica gel secondary encapsulation + lamp cap, imported high and low temperature waterproof wire, professional waterproof connector, to create a fully sealed waterproof structure, LED lamp section can achieve the highest level of protection IP68, especially suitable for the display screen built by the riverside and seaside.