Training in electrostatic knowledge and related techniques for personnel using electrostatic sensitive circuits.
Establish an anti-static working area, use an anti-static floor, an anti-static workbench, an anti-static grounding lead and an anti-static appliance in the area, and control the de-relative humidity to be more than 40.
The harm caused by static electricity to electronic equipment may be released anywhere from the manufacturer to the field equipment. Damage is caused by inadequate, effective training and malfunctioning of equipment handling. Led is an electrostatic sensitive device. Ingan wafers are generally considered to be " first bit" susceptible to interference. While ALINGAP LEDS SHI is " second bit" or better.
Damaged ESD devices can exhibit dim, blurred, extinguished, short or low VF or VR. ESD damaged equipment should not be confused with electronic overload, e.g. due to incorrect current design or drive, wafer hitch, wire shield grounding or packaging, or ordinary ambient induced pressure, etc.
ESD safety and control procedures: most electronics and electro-optic companies have very similar ESD and have successfully implemented so ESD control, handling and master procedures for equipment. These procedures have been used to detect quality effects since ESD was ancient. ISO - 9000 certification also lists him as a normal control procedure.
