Taxi led display based on its mobile bus for the media, can be widely circulated in many places, bringing great advertising promotion effect, and is widely accepted, it is different from the fixed place in the installation of ordinary LED display. The reason lies in the car and advertising.
Taxi LED display is the use of led technology, GSM / GPRS technology, low temperature technology, anti-static technology, anti-jamming technology, automotive electronics technology in the mobile car display information products.
Taxi LED display features:
1) good promotion
Buses and other means of transport can be said that all corners of the city, so its advertising effect can also affect the entire city, and thus products and services to bring great publicity.
2) high stability and reliability
The taxi is always moving, each brake will have some weak pull the power of pulling, so the car led display t electronic products, the stability and reliability requirements are high.
3) LED brightness attenuation
This is the common characteristics of LED products. LED attenuation characteristics, LED brightness is attenuation, in a year which has 10-70% attenuation rate, poor quality half year brightness reduced by half, resulting in can not see the display.
4) Stable power supply system support
Taxi power is battery-powered, the same car in the start, brake, stop will lead to a short supply voltage instability, if the power system is not good, it will burn the display.
5) Good anti-static measures
The Taxi is prone to static electricity during operation, especially in the fall electrostatic pressure can reach thousands of volts, if there is no good anti-static measures, EDM can easily damage the IC and LED lights.
6) Brightness is appropriate
The appropriate brightness, LED display if the brightness is not enough, can not see during the day, lost the meaning of the installation of the display; if too bright affect the traffic.
7) wide operating temperature range
In the north the car is generally placed outdoors. Winter temperatures may reach -40 ° C and summer temperatures may reach 60 ° C, which requires power and display components to operate at wide temperatures.