Outdoor Full Color Screen Design And Installation, These Issues Considered?

Aug 21, 2017

Leave a message

Rental  LED Video Wall Display Screen.


Outdoor full color display facing the main problems are as follows:

(1) display installed in the outdoors, the ability to adapt to the environment much higher than the indoor screen. Outdoor environment, the weather varies, the display should always be the wind and rain, the working environment is relatively poor. Once the display of electronic equipment is wet or subject to high temperature exposure, ranging from short circuit caused by the line, while in turn lead to fire, resulting in economic losses and casualties;

(2) summer thunderstorms, the display will be caused by lightning electromagnetic shock, so lightning protection measures must be appropriate;

(3) outdoor display will be affected by the brightness of the sun, the brightness of the display there are some requirements.

(4) the outdoor temperature changes in the normal work of the display will produce a certain amount of heat, such as hot weather, poor heat dissipation, integrated circuits will appear abnormal work, or even burned, affecting the display system Re - use;

(5) outdoor display installation environment in general space is relatively large, because the display for the audience wide, line of sight must be appropriate, too far will affect the viewing effect, but also cause the audience visual discomfort;

For the above special requirements, outdoor full color display must be done:

(1) the screen body and the screen body package and installation must be strictly arrived at the waterproof leak level, followed by the installation of a large screen to have a smooth drainage channel, in order to avoid water, water seepage, damage to the display effect;

(2) Install lightning protection devices on both sides of the display. The main body and the box to maintain a good grounding, grounding resistance is less than 3, so that the lightning generated by the timely release of the current;

(3) To ensure that the ambient light in the case of long-range can be watched, the need to use ultra-high brightness light-emitting diodes;

(4) box to install ventilation and cooling equipment to maintain the screen body temperature control in -10 degrees Celsius ~ 40 degrees Celsius between;

(5) chip selection, to choose the working temperature of minus 40 degrees Celsius to 80 degrees Celsius between the industrial and integrated circuit chip to prevent the display in the use of low ambient temperature areas of normal use;

(6) engineering workers need to use the environment and viewing distance from the appropriate spacing of the full color display, so as to achieve the best display.