LED display of the daily maintenance methods
In general, electronic products need to carry out routine maintenance work, especially outdoor LED display products, because of its use in the outdoor environment, need to overcome the high temperature cooling, dust and water, and even salt corrosion, you want to make life longer , In the use of the process not only need to pay attention to methods, but also on the screen for some routine maintenance, today to share with you to LED display life longer way.
First, the screen body power supply system inspection
1, first of all to check the distribution box in the connection of each line is rusty or loose, there are problems to be dealt with in a timely manner.
2, for safety, electrical box grounding must ensure that the normal, regular inspection.
3, the power lines and signal new road, but also regular checks to avoid the line broken or bitten.
4, for the entire power supply system also need to do a two-year inspection.
Second, the screen inside the various components of the fixed inspection
1, if found to be damaged and other parts of the problem when the timely replacement, especially the steel frame structure of the various small parts.
2, in the receipt of weather and other natural disasters, the need for early warning to the various components of the screen to the stability and safety of the inspection, if any problems, timely processing, so as to avoid unnecessary losses!
3, on a regular basis for the product and steel surface welding surface coating maintenance, to prevent corrosion rust and fall off.
4, an average of at least twice a year maintenance.
Third, for the LED lights cleaning and maintenance
With a soft brush gently scrub the LED tube outside the accumulation of dust, waterproof box, then you can also dipped in water to wash; for the environment, regular cleaning and maintenance.
Fourth, the lightning protection facilities inspection
1, regularly check the lightning rod and the ground line
2, in the event of thunder after the test should be on the tube, if the failure, you must promptly replaced.
3, more rainy period can often check.
5, LED control system inspection
1, in the LED control system above, according to the pre-set the situation one by one of its various functions to test.
2, for the screen of all lines and equipment should be regularly checked, so that the accident occurred.
3, the regularity of the system for reliability checks, such as 7 days and so on.
Do a good job on the LED display of the daily maintenance, to extend the life of the display, LED display to ensure the normal work has a crucial role.
Six, bad product inspection
For defective products to have regular checks, timely maintenance or replacement, usually three months to conduct.
The above is the LED display of the daily maintenance methods, so that these can be better to protect the big screen to extend its service life.