LED display installation structure
1, column installation: multi-purpose outdoor advertising led display installation, vision, more open around the place, such as the square, parking and so on. According to the size of the screen area can be divided into single column and double column installation. The pole is suitable for the installation of the LED display on open ground, and the outdoor screen is installed on the pole. In addition to the need for the production of steel column body structure, but also need to produce concrete or steel columns, the main consideration of the ground conditions.
2, stowage: a concrete structure in the ground to build a wall enough to support the entire LED display wall, the steel structure on the wall to install the display screen, steel structure reserved 800mm of space for maintenance, placing equipment and maintenance facilities .
3, mosaic installation: indoors, for a smaller indoor screen. Due to the installation space is smaller, in order not to take up space, according to the size of the screen area dug the same size of the wall area, the LED display embedded in the wall. Requires the wall as a solid wall. Pre-maintenance methods, higher cost. For outdoor installation, the mounting structure is suitable for the display project that has been incorporated in the planning and design of the building. The installation space of the display screen is pre-reserved for the construction of the civil construction project. The actual installation only requires the display of the steel structure. The display screen Inlaid in the building wall, left enough space for maintenance.
4, hanging installation: more suitable for station LED display, airport LED display and other large venues play a role in indicating signs. Requires a smaller screen area. (10 square meters or less) requirements must have a suitable installation location, such as the above beam or beam, and the general body to add a back cover.
Common hanging for the total weight of the screen body is less than 50kg single box display can be hung directly on the load-bearing wall, without leaving space for maintenance, display cabinet with a positive maintenance design, maintenance, the screen will be opened from the bottom Can be.
Rack mount suitable for general outdoor display, taking into account the difficulty of the screen maintenance, the screen body and the wall between the steel structure support, reserved 800mm of space for maintenance, space equipped with horse Road, ladders and other maintenance facilities, And install the power distribution cabinets, air conditioners, axial fans, lighting and other auxiliary equipment.
5, wall-mounted installation: more suitable for indoor LED display installation, small size (10 square meters below), the wall is required real wall, hollow brick or simple barrier wall are not suitable for this installation.
6, roof-mounted installation: mainly used for outdoor advertising LED display, the installation site is mainly the roof of the building, as the height of the building to be considered with the level of wind also increased.
