Common Failures And Maintenance Methods Of Indoor LED Display Screens

Sep 15, 2017

Leave a message

What are the abnormal conditions of LED display, and how are they damaged?

Manufacturers, on-site installation and debugging good LED display and deliver users, anomalies are the fault of the problem, according to the previous user feedback, in the aggregate, usually has the following several ways and repair method:

1. There are scattered light bulbs in the whole screen, also called black dots, bad lights, dead lights. (if it is not a regional occurrence, as long as it is in the range of failure rate, generally does not affect the display effect)

2. The LED display screen has a jump box, and the same is true for repeated operation. (check where the power lines are short, especially if there is a touch on the connecting line of the positive and negative power cord, and the connector on the power switch; And then there's no metal objects falling inside the screen.

2. LightS HD P1.875 LED display screen.jpg

3. An abnormal display of LED display, a flash of mixed color. (from the abnormal location board, check whether the line is loose and the interface of the board is damaged. If there is any problem, replace the line or failure board)

4. A large display of LED display screen does not show that it is all black. (first consider the power transfer problems, from the board began to check, to see if the power switch is broken without electricity, check wiring loose signal transmission in the past, no then there is the receiving card damage problem; Can find a solution by excluding them.

5. When the LED screen plays video or picture, the computer software shows that the area is normal, but the screen sometimes shows the phenomenon of caton and black screen. (generally, the network quality problem, video data transmission will cause the black screen carton phenomenon, and the quality of the network will be solved.)

6. One of the panels on the LED display screen flashes a flash of squares, colors, and successive lights display anomalies. (that is the board problem, change the board of the abnormal display, the indoor screen wall installation is usually a magnet to absorb, use point force to pick off the board change can)

7. The large screen of the LED has a section of the panel displaying the abnormality, such as the clutter of the color flashing. (generally, the receiving card problem is checked and the card control is checked. The replacement card can solve the problem.)

8, computer Internet access line and LED large screen cable connection, good software prompts "found no system on a large screen, even if the LED screen can also play pictures, video functions normally, but the software is all set to send data failure, such as brightness send failure. (generally, the issue of sending CARDS can be solved by changing the sending card.)

9. The display software window of the LED display is normal, but the screen is demented, staggered or divided into multiple Windows to display the same image separately. (it is the software setting problem that can be resolved when the software setting is reset correctly.)

10. Want to synchronize PC desktop full screen display with LED display. (if there is no LED video processor, this feature is not available; The video processor can be adjusted on video processor to synchronize the display area to the LED screen.